View LTD121EC5S_4168700.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Toshiba Matsushita Display Technology Co., Ltd.
PRODUCT INFORMATION
31cm COLOUR TFT-LCD MODULE (12.1 TYPE)
LTD121EC5S (p-Si TFT)
FEATURES
(1) 12.1"XGA(1024x768 pixels) display size for notebook PC (2) Light weight, High Brightness(200cd/m2) design (3) LVDS interface system (H-Sync, V-Sync)
TENTATIVE
MECHANICAL SPECIFICATIONS
Item Dimensional Outline (typ.) Number of Pixels Active Area Pixel Pitch Weight (approximately) Backlight Specifications 261.0(W) x 199.0 (H) x 5.0max(D) mm 1024(W) x 768(H) pixels 245.76(W) x 184.32(H) mm 0.24(W) x 0.24(H) 265 g Single CCFL, Sidelight type
ABSOLUTE MAXIMUM RATINGS
Item Supply Voltage (VDD) (VFL) FL Driving Frequency (fFL) Input Signal Voltage (VIN) Operating Temperature Storage Temperature Storage Humidity Min. -0.3 0 -0.3 0 -20 10 Max. 4.0 2.0 100 VDD+0.3 50 60 90 Unit V kV(rms) kHz V C C %(RH)
ELECTRICAL SPECIFICATION
Item Supply Voltage FL Start Voltage (Ta=0C) Differential Input Voltage Common Mode Input Voltage Current Consumption *1 *2 Power Consumption
*1 : 8 color bars pattern *2 : Excepting the efficiency FL inverter
(VDD) (VFL) (VID) (VCM) *1 (IDD) *2 (IFL)
Min. 3.0 --1200 100 1.0 -------
Typ. 3.3 625 ------215 6.0 4.46
Max. 3.6 --(1400) 600 2.4-(VID)/2 -------
Unit V V(rms) V(rms) mV V mA mA(rms) W
Remarks IFL=6.0 mA(rms)
IFL=6.0 mA(rms)
OPTICAL SPECIFICATION (Ta=25C)
Min. 100 (tON) --(tOFF) --Luminance (L) 160 Viewing Angle U/D/R/L* 10/20/30/30 *U: Upper side, D: Down side, R: Right side, L: Left side Item Contrast Ratio (CR) Response Time Typ. 250 ----200 Max. --25 25 --Unit --ms ms cd/m2 degree Remarks
IFL=6.0 mA(rms)
*The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by Toshiba Matsushita Display Technology or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Toshiba Matsushita Display technology or others. *The information contained herein may be changed without prior notice. It is therefore advisable to contact Toshiba Matsushita Display Technology before proceeding with the design of equipment incorporating this product.
(1/10)
2005-06-20 (Ver.0.6)
5.0(Max) 115 3. 91.5 2 5-0 3 . +.
21 6
DIMENSIONAL OUTLINE
2 5-0 3 . +.
23.1
CN1:DF19L-20P-1H(HIROSE)
2 0 1
1 . - 0.3 4 9+
1 0- 0 3 7 +.
199
85
TENTATIVE
(245.76) (Active Area) (250.4) (Bezel Opening)
(184.32) (Active Area)
(188.8) (Bezel Opening)
Unit : mm
FL CN2:BHSR-02VS-1(JST)
23.8 90+ 10 -
Standard tolerance : 0.5
2005-06-20 (Ver.0.6)
4M, P. (et 22A. -2 04 Dph .MX)
TENTATIVE
3 5(m x. . a)
1 0- 0 3 7 +.
(2/10)
LTD121EC5S
LTD121EC5S BLOCK DIAGRAM
X-driver
DC/DC converter
Y-driver
Liquid Crystal Panel
Gray scale Manipulation Voltage Generation Circuit
1 0 2 4 x 76 8 p i x e l s
CN1 Connector Panel Controller LVD S i ncl ude
Y - d r i ve r Backlight
1, 1 1, 2
2, 1
X2n-1, 1
X2n, 1
1024, 1
1, Y
X2n-1, Y
X2n, Y
768 pixels
1, 768
1024,768
(3/10)
2005-06-20 (Ver.0.6)
CN2
LTD121EC5S TIMING CHART
tv tvw VSYNC tvsu HSYNC tv p tvds tvbp tvd tvhd th
DE
1023
1024
1
2
th thw HSYNC thfp DE 1024 pixel
1234
thbp thds thd
CLK
(4/10)
2005-06-20 (Ver.0.6)
LTD121EC5S TIMING SPECIFICATION 1) 2) 3) 4) 5) 6) 7)
Item Horizontal Scanning Term H-sync Pulse Width Horizontal Front Porch Horizontal Back Porch Horizontal Data Sync Period Horizontal Display Term Frame Period V-sync Pulse Width V-sync Set Up Time (to H-sync) V-sync Hold Time Vertical Front Porch Vertical Back Porch Vertical Data Sync Period Vertical Display Term Clock Period Symbol th thw thfp thbp thds thd tv tvw tvsu tvhd tvfp tvbp tvds tvd tc min. 1334 x tc 4 x tc 4 x tc 24 x tc 32 x tc 1024 x tc 778 x th 2 x th 8 x tc (thbp+16) x tc 1 x th 2 x th 8 x th 768 x th 15.0 typ. 1344 x tc 136 x tc 24 x tc 160 x tc 296 x tc 1024 x tc 806 x th 6 x th 3 x th 29 x th 35 x th 768 x th 15.38 max. 1024 x tc 860 x th 768 x th unit clock clock clock clock clock clock line line clock clock line line line line ns
Note 1) Refer to "Timing Chart" and LVDS (THC63LVDF84A-85) specifications by THine Electronics, Inc. corporation. Note 2) If DE is fixed to "H" or "L" level for certain period while NCLK is supplied, the panel displays black with some flicker. Note 3) If NCLK is fixed to "H" or "L" level for certain period while DE is supplied, the panel may be damaged. Note 4) Please adjust LCD operating signal timing and FL driving frequency, to optimize the display quality. There is a possibility that flicker is observed by the interference of LCD operating signal timing and FL driving condition (especially driving frequency), even if the condition satisfies above timing specifications and recommended operating conditions shown in 3. Note5 ) Do not make tv, tvhd and tvds fluctuate. If tv, tvhd, and tvds are fluctuate, the panel displays black. Note6) In case of using the long frame period, the deterioration of display quality, noise etc. may be occurred. Note7) NCLK count of each Horizontal Scanning Time should be always the same. V-Blanking period should be "n" X "Horizontal Scanning Time". (n: integer) Frame period should be always the same.
(5/10)
2005-06-20 (Ver.0.6)
LTD121EC5S CONNECTOR PIN ASSIGNMENT FOR INTERFACE
CN1
INPUT SIGNAL Connector : DF19L-20P-1H / HIROSE Mating Connector : DF19G-20S-1F (FPC), DF19G-20S-1C (Cable) Terminal No. Symbol Function GND 1 VSS Power Supply : +3.3V 2 VDD Power Supply : +3.3V 3 VDD DDC 3.3V power 4 VEDID 5 NC Non-Connection 6 CLKEDID DDC clock 7 DATAEDIE DDC data 8 RxIN0Negative LVDS differential data input (R0-R5,G0) 9 RxIN0+ Positive LVDS differential data input (R0-R5,G0) GND 10 VSS 11 RxIN1Negative LVDS differential data input (G1-G5, B0-B1) 12 RxIN1+ Positive LVDS differential data input (G1-G5, B0-B1) GND 13 VSS 14 RxIN2Negative LVDS differential data input (B2-B5, HS, VS, DE) 15 RxIN2+ Positive LVDS differential data input (B2-B5, HS, VS, DE) GND 16 VSS 17 CLKClock Signal(-) 18 CLK+ Clock Signal(+) GND 19 VSS GND 20 VSS Note 1) Please connect GND pin to ground. Don't use it as no-connect nor connection with high impedance. Note 2) Please connect NC pin to nothing. Don't connect it to ground nor to other signal input.
CN2
CCFL POWER SOURCE Connector : BHSR-02VS-1 / JAPAN SOLDERLESS TERMINAL MFG CO., LTD. Mating Connector : SM02B-BHS-1 / JAPAN SOLDERLESS TERMINAL MFG CO., LTD. Terminal No. Symbol Function CCFL Power Supply ( high voltage) 1 VFLH CCFL Power Supply (low voltage) 2 VFLL
(6/10)
2005-06-20 (Ver.0.6)
LTD121EC5S RECOMMENDED TRANSMITTER (THC63LVDF63A,THC63LVDM63A,THC63LVDM63A-85) TO LTD121EC5S INTERFACE ASSIGNMENT
Case1: 6bit Transmitter
THC63LVDF63A,THC63LVDM63A,THC63LVDM63A-85
Input Terminal No. Symbol TIN0 TIN1 TIN2 TIN3 TIN4 TIN5 TIN6 TIN7 TIN8 TIN9 TIN10 TIN11 TIN12 TIN13 TIN14 TIN15 TIN16 TIN17 TIN18 TIN19 TIN20 CLK IN Terminal 44 45 47 48 1 3 4 6 7 9 10 12 13 15 16 18 19 20 22 23 25 26 Input Signal (Graphics controller output signal) Symbol Function R0 Red Pixels Display Data (LSB) R1 Red Pixels Display Data R2 Red Pixels Display Data R3 Red Pixels Display Data R4 Red Pixels Display Data R5 Red Pixels Display Data (MSB) G0 Green Pixels Display Data (LSB) G1 Green Pixels Display Data G2 Green Pixels Display Data G3 Green Pixels Display Data G4 Green Pixels Display Data G5 Green Pixels Display Data (MSB) B0 Blue Pixels Display Data (LSB) B1 Blue Pixels Display Data B2 Blue Pixels Display Data B3 Blue Pixels Display Data B4 Blue Pixels Display Data B5 Blue Pixels Display Data (MSB) HSYNC H-Sync VSYNC V-Sync DE Compound Synchronization Signal CLK Data Sampling Clock Output Signal Symbol LTD121EC5S Interface (CN1) Terminal Symbol
TOUT0TOUT0+
No.8 No.9
IN0IN0+
TOUT1TOUT1+
No.11 No.12
IN1IN1+
TOUT2TOUT2+
No.14 No.15
IN2IN2+
TCLK OUTTCLK OUT+
No.17 No.18
CLKCLK+
Note 1) Please connect NC pin to nothing.
Don't connect it to ground nor to other signal input.
IN 0
T IN6
T IN5
T IN4
T IN3
T IN2
T IN1
T IN0
G0 IN 1
T IN13
R5
T IN12
R4
T IN11
R3
T IN10
R2
T IN9
R1
T IN8
R0
T IN7
B1 IN 2
T IN20
B0
T IN19
G5
T IN18
G4
T IN17
G3
T IN16
G2
T IN15
G1
T IN14
DE
VSYNC
HSYNC
B5
B4
B3
B2
(7/10)
2005-06-20 (Ver.0.6)
LTD121EC5S RECOMMENDED TRANSMITTER (THC63LVDF63A,THC63LVDM63A,THC63LVDM63A-85) TO LTD121EC5S INTERFACE ASSIGNMENT
Case2: 8bit Transmitter
THC63LVDF63A,THC63LVDM63A,THC63LVDM63A-85
Input Terminal No. Symbol TIN0 TIN1 TIN2 TIN3 TIN4 TIN6 TIN7 TIN8 TIN9 TIN12 TIN13 TIN14 TIN15 TIN18 TIN19 TIN20 TIN21 TIN22 TIN24 TIN25 TIN26 TIN27 TIN5 TIN10 TIN11 TIN16 TIN17 TIN23 CLK IN Terminal 51 52 54 55 56 3 4 6 7 11 12 14 15 19 20 22 23 24 27 28 30 50 2 8 10 16 18 25 31 Input Signal (Graphics controller output signal) Symbol Function R0 Red Pixels Display Data (LSB) R1 Red Pixels Display Data R2 Red Pixels Display Data R3 Red Pixels Display Data R4 Red Pixels Display Data R5 Red Pixels Display Data (MSB) G0 Green Pixels Display Data(LSB) G1 Green Pixels Display Data G2 Green Pixels Display Data G3 Green Pixels Display Data G4 Green Pixels Display Data G5 Green Pixels Display Data(MSB) B0 Blue Pixels Display Data (LSB) B1 Blue Pixels Display Data B2 Blue Pixels Display Data B3 Blue Pixels Display Data B4 Blue Pixels Display Data B5 Blue Pixels Display Data (MSB) HSYNC H-Sync VSYNC V-Sync DE Compound Synchronization Signal NC Non Connection (open) NC Non Connection (open) NC Non Connection (open) NC Non Connection (open) NC Non Connection (open) NC Non Connection (open) NC Non Connection (open) CLK Data Sampling Clock Output Signal Symbol LTD121EC5S Interface (CN1) Terminal Symbol
TOUT0TOUT0+
No.8 No.9
IN0IN0+
TOUT1TOUT1+
No.11 No.12
IN1IN1+
TOUT2TOUT2+
No.14 No.15
IN2IN2+
TOUT3TOUT3+
TCLK OUTTCLK OUT+
No.17 No.18
CLKCLK+
Note 1) Please connect NC pin to nothing.
Don't connect it to ground nor to other signal input.
IN 0
T IN 7
T IN 6
T IN 4
T IN 3
T IN 2
T IN 1
T IN 0
G0 IN 1
T IN 1 8
R5
T IN 1 5
R4
T IN 1 4
R3
T IN 1 3
R2
T IN 1 2
R1
T IN 9
R0
T IN 8
B1 IN 2
T IN 2 6
B0
T IN 2 5
G5
T IN 2 4
G4
T IN 2 2
G3
T IN 2 1
G2
T IN 2 0
G1
T IN 1 9
DE IN 3
T IN 2 3
VSYNC
T IN 1 7
HSYNC
T IN 1 6
B5
T IN 1 1
B4
T IN 1 0
B3
T IN 5
B2
T IN 2 7
NC
NC
NC
NC
NC
NC
NC
(8/10)
2005-06-20 (Ver.0.6)
LTD121EC5S 256k (k=1024) COLORS COMBINATION TABLE
Display Black Blue Green Light Blue Red Purple Yellow White Black
R5 R4 R3 R2 R1 R0 L L L L H H H H L L L L L L L H H H H L L L L L L L H H H H L L L : : H H H L L L H H H L L L H H H L L L : : L L L L L L L L L L L L L L L L L L : : L L L L L L L L L L L L L L L L L L : : H H H H H H H H H H H H L H H H L H L L L L L L L L L L L H L L L L H L L L L L L L L L L L L L L L L L L L H H H L L L L H H L L L H L H L L L L L L L H H H H L L L L L L L H H H H L L H L L L L H H H H L H L
G5 G4 G3 G2 G1 G0 L L H H L L H H L L L L L H H L L H H L L L L L H H L L H H L L L : : L L L L L L L L L L L L L L L L L L : : H H H L L L H H H L L L H H H L L L : : L L L L L L L L L L L L L L L L L L : : H H H H H H H H H H H H L H H H L H L L L L L L L L L L L H L L L L H L H H H L L L L H H L L L H L H L L L L L L L L L L L L L L H L L L L H L L L H H L L H H L L L L L H H L L H H L L L L L H H L L H H L L L
B5 B4 B3 B2 B1 B0 L H L H L H L H L L L L H L H L H L H L L L L H L H L H L H L L L : : L L L L L L L L L L L L L L L L L L : : L L L L L L L L L L L L L L L L L L : : H H H L L L H H H L L L H H H L L L : : H H H H H H H H H H H H L H H H L H H H H L L L L H H L L H H L H L H L L L L L L L L L L L L H L L L L H L L L L L L L L L L L L L L L L L L L L H L H L H L H L L L L H L H L H L H L L L L H L H L H L H L L L
Gray Scale Level L0 L1 L2 L3... L60 L61 L62 Red L63 L0 L1 L2 L3... L60 L61 L62 Green L63 L0 L1 L2 L3... L60 L61 L62 Blue L63 L0 L1 L2 L3... L60 L61 L62 White L63
Basic Color
Gray Scale of Red
Dark Light Red Black
Gray Scale of Green
Dark Light Green Black
Gray Scale of Blue
Dark Light Blue Black
Gray Scale of White & Black
Dark Light White
(9/10)
2005-06-20 (Ver.0.6)
LTD121EC5S
!
FOR SAFETY
LCD module is generally designed with precise parts to achieve light weighted thin mechanical dimensions. In using our Modules, make certain that you fully understand and put into practice the warnings and safety precautions detailed in Engineering Information No.EE-D-001A,"CAUTIONS AND INSTRUCTIONS FOR TOSHIBA MATSUSHITA DISPLAY TECHNOLOGY LCD MODULES". Refer to individual specifications and TECHNICAL DATA sheets (hereinafter called "TD") for more detailed technical information.
1) SPECIAL PURPOSES
A) Toshiba Matsushita Display technology's Standard LCD Modules have not been customized for operation in extreme environments or for use in applications where performance failures could be life-threatening or otherwise catastrophic. B) Since Toshiba Matsushita Display technology's Standard LCD Modules have not been designed for operation in extreme environments, they must never be used in devices that will be exposed to abnormally high levels of vibration or shock which exceed Toshiba Matsushita Display technology's published specification limits. C) In addition, since Toshiba Matsushita Display technology Standard LCD Modules have not been designed for use in applications where performance failures could be life-threatening or catastrophic, they must never be installed in aircraft navigation control systems (such as, but not limited to Traffic Collision Avoidance System and Air Traffic Indicator), in military defense or weapons systems, in critical industrial process-control systems (e.g., those involved in the production of nuclear energy), or in critical medical device or patient life-support systems.
2) DISASSEMBLING OR MODIFICATION
DO NOT DISASSEMBLE OR MODIFY the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. Toshiba Matsushita Display technology doses not warrant the module, if customer disassembled or modified it.
3) BREAKAGE OF LCD PANEL
DO NOT INGEST liquid crystal material, DO NOT INHALE this material, and DO NOT CONTACT the material with skin, if LCD panel is broken and liquid crystal material spills out. If liquid crystal material comes into mouth or eyes, rinse mouth or eyes out with water immediately. If this material contact with skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water.
4) GLASS OF LCD PANEL
BE CAREFUL WITH CHIPS OF GLASS that may cause injuring fingers or skin, when the glass is broken.
5) ELECTRIC SHOCK
DISCONNECT POWER SUPPLY before handling LCD module. DO NOT TOUCH the parts inside LCD module and the fluorescent lamp's connector or cables in order to prevent electric shock, because high voltage is supplied to these parts from the inverter unit while power supply is turned on.
6) ABSOLUTE MAXIMUM RATINGS AND POWER PROTECTION CIRCUIT
DO NOT EXCEED the absolute maximum rating values under the worst probable conditions caused by the supply voltage variation, input voltage variation, variation in parts' constants, environmental temperature, etc., otherwise LCD module may be damaged. Employ protection circuit for power supply, whenever the specification or TD specifies it. Suitable protection circuit should be applied for each system design.
7) DISPOSAL
When dispose LCD module, obey to the applicable environmental regulations.
(10/10)
2005-06-20 (Ver.0.6)

▲Up To Search▲

Price & Availability of LTD121EC5S

	To Download LTD121EC5S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .